Bricklayer rebuilding a chimney stack on a roof
Stacks, Pots, Cowls & Flashings

Chimney Repairs in Buckinghamshire

Keep your chimney stack sound and dry, from crumbling joints and cracked flaunching to loose pots, with a written price agreed before anyone goes up.

Roof leaking now? See Emergency Roof Repairs

Get a FREE Quote

Fill in the form and we'll get back to you shortly.

Step 1 of 2

Chimney Stack Care

Chimney Stack Repairs

A chimney stack stands proud of the roof on every side, so it weathers faster than almost any other part of the house. Mortar joints erode, the flaunching on top cracks, pots loosen and flashings lift. Left alone, those small faults let water into the brickwork and down into the rooms below.

Our team repoints stacks, renews flaunching, refixes or replaces pots, fits cowls and replaces failed flashings. Where a stack is beyond repair we can rebuild it, and where an unused chimney is no longer wanted we can take it down and make good the roof. We work in Beaconsfield, Gerrards Cross and further afield.

Chimney problems often show up first as a leak inside, and our approach to roof repairs shows how we trace water back to its source. Whatever is wrong with the stack, the cost is set out in writing and agreed with you before any of it is touched.

Chimney stack under repair with scaffold and protective sheeting
Roofer laying bricks to rebuild a chimney stack
Lead flashing around the base of a brick chimney on a clay tiled roof
Brick chimney stacks with lead flashings on a clay tiled roof
Chimney Repairs: What's Included

Chimney Work We Carry Out

Your quote lists each part of the stack we will work on, from the pointing to the pots, so you can see what is being repaired and the reason for it.

  • Repointing eroded joints in the chimney brickwork
  • Renewing cracked or crumbling flaunching on top
  • Refixing loose pots or fitting replacement pots
  • Fitting cowls and caps to keep out rain and birds
  • Replacing lifted or split chimney flashings
  • Rebuilding stacks that are unsafe or badly worn
  • Taking down unused chimneys and making good
  • Clearing all brick dust and rubble when finished
When to Book Chimney Repairs

Chimney Warning Signs

Chimneys take the full force of wind and rain, and their faults are easy to miss from the ground. Look out for these.

Crumbling Mortar

Joints between the bricks that have eroded, crumbled or fallen out let water soak into the stack and weaken it over time.

Damp Chimney Breast

Damp patches or staining on the chimney breast inside, often near the ceiling, point to water getting into the stack above.

Cracked Flaunching

Cracks in the mortar cap around the pots let rain run down inside the stack and can leave the pots themselves loose.

Leaning or Loose Stack

A stack that has started to lean, or pieces of brick and pot found in the garden, needs checking before anything falls.

Swipe to See More

Why Choose Us for Chimney Repairs

Why Trust Us with Your Stack

Chimney work happens high up on an exposed part of the roof, and it has to stand up to everything the weather brings. You get a team that plans it with care.

Brick chimney stack with new lead flashings on a red tiled roof

Matched Mortar & Brickwork

When we repoint or rebuild, we aim to match the colour and texture of your existing mortar and bricks, so the repair blends into the house.

Planned Dates

A written schedule, issued before work starts, lists the days our roofers will be at the stack, so planning is easy.

Experience That Counts

Chimney faults are judged by someone who has seen plenty of them: the owner, who has worked 15 years in the roofing trade.

One Agreed Price

You pay the figure on the accepted quote. If the stack hides a problem we could not see, we show you and agree it first.

Ready to Get Started?

Ring Royale Roofing Ltd, or leave your details for a quote.

Swipe to See More

Reviews

Chimney Repair Reviews

Get Your Chimney Looked At

Ring now, or leave a few details and a quote will follow.

Our Work

Our Chimney Repairs

Swipe to See More

More Repair Services

Related Repair Services

Chimneys are only one source of trouble on an older roof. Here are the other repair services our team provides.

Chimney Repairs: How It Works

Our Chimney Repair Process

The stages below apply to most chimney work, though every stack has its own needs.

1

Inspect the Stack

We check the brickwork, pointing, flaunching, pots and flashings to see what has failed and what is still sound.

2

Price It in Writing

You receive a fixed written quote setting out each repair, the safe access needed and the days we plan to be there.

3

Repair or Rebuild

Loose mortar is raked out and renewed, flaunching and pots are reset, and flashings or brickwork are replaced as agreed.

4

Look It Over Together

With the stack finished and the rubble taken away, we review the completed work with you and confirm everything has been done as agreed.

Swipe to See More

Chimney Repairs FAQs

Chimney Repair FAQs

What Is Chimney Flaunching?

Flaunching is the sloped layer of mortar on top of a chimney stack that holds the pots in place and throws rainwater off the top. Because it faces the sky, it takes the worst of the frost and rain, and it often cracks before the rest of the stack. Renewing it stops water getting into the stack from above.

How Do I Know If My Chimney Needs Repointing?

Look at the joints between the bricks. If the mortar has worn back, crumbled or fallen out in places, the stack needs repointing. Other clues include damp on the chimney breast inside or bits of mortar collecting on the roof or the ground. We can check closely from the roof and tell you how much needs doing.

Do I Need a Cowl on My Chimney?

A cowl or cap stops rain, birds and debris getting into the flue. On a chimney you no longer use, a capped top with ventilation keeps it dry while letting air move through. On a working flue the right cowl depends on the appliance, so we will ask what the chimney serves before recommending one.

Can You Remove a Chimney I No Longer Use?

Yes. An unused stack above the roofline can be taken down, the opening covered, and the roof tiled over so it matches the slope around it. A stack shared with a neighbour, or one that supports anything inside, needs more thought, and we will explain what applies to your house when we visit.

Can a Leaning Chimney Be Repaired?

It depends on how far it has moved and why. A slight lean caused by weathered mortar on one side can sometimes be corrected by rebuilding the top section. A badly leaning stack is usually taken down to a sound level and rebuilt. Either way, we look closely before giving you a written price for the safest option.

Why Is My Chimney Breast Damp?

Damp on a chimney breast usually comes from water entering the stack above the roof: through eroded pointing, cracked flaunching, an open pot or a failed flashing. We find the route the water is taking before suggesting any repair, which means the work you pay for is aimed at the actual cause.
Contact

Can't Find the Answer You're Looking For?

Get in touch with us today.

01494 370053Get a FREE Quote