EPDM rubber flat roof with an upstand being cleared of leaves
Great Missenden, Buckinghamshire

Rubber Roofs in Great Missenden

Tired of patching a leaking flat roof in Great Missenden? EPDM rubber goes down in one piece on most homes, so the joints that usually fail simply are not there.

Get a FREE Quote

Fill in the form and we'll get back to you shortly.

Step 1 of 2

Great Missenden, Buckinghamshire

Rubber Roofs for Extensions

If the flat roof over your Great Missenden extension has been patched more than once, a rubber membrane can replace the lot with one continuous sheet. The EPDM is unrolled, left to relax, then glued to the deck across its whole area so wind cannot lift it and no air pockets form.

Homeowners in Great Missenden and in Chesham, Amersham and High Wycombe can read about us on Checkatrade, where we are vetted members, before inviting our team to quote for an EPDM roof.

Clearing leaves from an EPDM rubber flat roof around the outlet
Finished EPDM rubber roof on a single-storey rear extension
New EPDM rubber flat roof on a house extension
Why Choose Us for Rubber Roofs

Why Choose Us for EPDM

You get a fixed written price for a rubber roof in Great Missenden, a callback the same day you get in touch and a vetted Checkatrade member doing the work.

Black EPDM rubber flat roof on a dormer beside a new slate roof

Fewer Joints, Fewer Leaks

With the roof covered in one sheet wherever possible, there are very few seams for water to work into, so the room below stays dry.

Built for All Weather

EPDM flexes in summer heat and winter cold, so the membrane moves with the roof instead of cracking as temperatures change.

Price Fixed in Writing

The amount on your accepted quote is the amount you pay. If the deck hides rot, we show you and agree it before we go on.

Send Us a Photo

WhatsApp a photo of your flat roof to 07809 601343 and expect a same-day callback from us about what the roof needs.

Ready to Get Started?

Ring Royale Roofing Ltd, or leave your details for a quote.

Swipe to See More

Reviews

Rubber Roof Customer Reviews

Ask About a Rubber Roof

Ring now, or leave a few details and a quote will follow.

Rubber Roofs: How It Works

Fitting a Rubber Roof

Every roof has its own quirks, but fitting an EPDM roof generally runs through four broad stages.

1

Survey & Quotation

We measure the roof, check the deck and the edges, and send you a fixed price in writing for the new rubber roof.

2

Deck Preparation

The old covering comes off and the boards are checked, with any weak sections replaced so the membrane has a firm base.

3

Bonding the Membrane

The EPDM sheet is laid out, bonded to the deck and dressed into the corners, then the trims and upstands are fixed.

4

Your Final Inspection

When the edges are finished and the area below is swept, we review the completed work with you and confirm everything has been done as agreed.

Swipe to See More

Rubber Roofs FAQs

Rubber Roofs FAQs in Great Missenden

Can You Fit a Rubber Roof on My Garage in Great Missenden?

Yes. A garage is often an ideal candidate for EPDM, since the roof is usually small enough to cover with a single sheet. We visit your home in Great Missenden, check the deck and falls, and send a free written quote at a fixed price before anything is booked.

Which Areas Do You Fit Rubber Roofs in Besides Great Missenden?

As well as Great Missenden, we fit and repair EPDM roofs in Chesham, Amersham and High Wycombe and every other town we cover. Wherever you are, the steps match: our team returns your call the same day, we visit to look at the roof, and you receive a free written quote.

What Is EPDM?

EPDM stands for ethylene propylene diene monomer, a synthetic rubber made for roofing and other outdoor uses. As a roof membrane it comes in large sheets, resists sunlight and stays flexible through temperature changes. On a typical domestic flat roof it can usually be laid as one piece.

How Is a Rubber Roof Different From Felt?

Felt is built up from several bonded layers, whereas rubber is a single membrane, usually in one piece across the roof. That means fewer seams to fail and a covering that copes well with movement as the weather changes. Felt can cost less, while rubber gives a cleaner finish. We price whichever suits your roof.

Can a Rubber Roof Be Fitted Over My Existing Roof?

Sometimes, but we usually recommend stripping the old covering first. That lets us check the deck for rot or soft spots and correct the falls, so the new membrane sits on a sound, even base. Laying rubber over a failing roof can hide problems that later cause leaks.

Can I Walk on a Rubber Roof?

An EPDM roof can take occasional foot traffic, for example to clear a gutter or clean a rooflight, but it is not designed as a walkway or terrace. If you need regular access, we can discuss walkway protection or a more rigid surface when we come to quote.
Contact

Can't Find the Answer You're Looking For?

Get in touch with us today.

01494 611756Get a FREE Quote