New stepped lead flashing between a brick wall and a clay tiled roof
Haddenham, Buckinghamshire

Leadwork in Haddenham

Get a free, fixed quote for leadwork on your Haddenham roof, worked out once we have found where the water is getting past the old lead.

Get a FREE Quote

Fill in the form and we'll get back to you shortly.

Step 1 of 2

Haddenham, Buckinghamshire

Choosing the Right Lead Code

For homeowners in Haddenham, Buckinghamshire, good leadwork is easy to overlook until a leak appears, yet it protects the joints that matter most on a roof. The worn lead comes away first, along with crumbling pointing, so new pieces can be wedged into a clean joint in the brickwork and sealed with fresh mortar.

We carry out leadwork in Haddenham as well as Waddesdon, Aylesbury and Great Missenden, from a single chimney flashing to a full bay roof, and every job starts with finding why the old lead failed.

New lead valley between two slopes of an old tiled roof
Lead flashing where a grey tiled roof meets a brick wall
Lead-lined gutter between two tiled roof slopes
Why Choose Us for Leadwork

Why Choose Our Leadwork

The roofer leading our team has spent 15 years in the trade, so lead on your Haddenham roof is fitted in the right code, at a length that lets it move.

Lead sheet roof with dressed rolled joints

Shaped by Hand on Your Roof

Each flashing is cut and dressed in place to the shape of your brickwork and tiles, so it sits tight against the surface and sheds water cleanly.

15 Years in the Trade

The owner has spent 15 years in the roofing trade, so lead is dressed and fixed the way it should be on every job.

Fixed Quoted Prices

The figure on your accepted quote is the bill. If a hidden defect appears, we stop, show it to you and agree it first.

Days Agreed in Advance

Your written schedule arrives ahead of the job and names the days our roofers will be working at your house.

Ready to Get Started?

Ring Royale Roofing Ltd, or leave your details for a quote.

Swipe to See More

Reviews

Leadwork Customer Reviews

Get a Leadwork Quote

Ring now, or leave a few details and a quote will follow.

Leadwork: How It Works

How a Leadwork Job Runs

Each roof differs, but most leadwork follows the same broad stages from first look to final check.

1

Inspect the Joints

We look at the existing lead, the mortar and the tiles around it to find where water is getting in and why the old lead failed.

2

Written Quote

You receive a written price listing each piece of lead, its code and the fixing method, along with the days we plan to be on site.

3

Strip & Refit

Old lead and loose mortar come out, the chases are cleaned, and new lead is cut, dressed and fixed with room to expand.

4

Final Check

Once the last piece is pointed in and the offcuts are gone, we review the completed work with you and confirm everything has been done as agreed.

Swipe to See More

Leadwork FAQs

Leadwork FAQs in Haddenham

Do You Replace Lead Flashings in Haddenham?

Yes. Our team replaces chimney and wall flashings, valleys, lead-lined gutters and bay roofs in Haddenham, as well as in Waddesdon, Aylesbury and Great Missenden. We find out why the old lead let water in, then send a fixed written price. There is no charge for the visit or the quote, so call us to arrange a time.

Can You Fix Leadwork on a Period Home in Haddenham?

Yes. Older houses often carry lead around chimneys, bays, porches and parapet gutters, and where lead was used originally we normally renew it in lead. We follow the existing detailing where it worked well and agree the price in writing before any old lead comes off.

What Is a Lead Code?

A lead code is a number that describes the thickness and weight of the sheet. Thinner codes are easier to dress into tight shapes, so they suit step flashings, while heavier codes go where lead lies flatter and has to resist wear, such as valleys, gutters and bay roofs. Picking the right code for each position has a big effect on how long leadwork lasts.

Why Has the Lead Around My Chimney Cracked?

Lead expands in summer heat and contracts in winter. If a piece was fitted too long, nailed too tightly or cut from a code that was too thin, that movement eventually splits it. Old pointing that has fallen out of the chase also lets water behind the flashing. We work out which of these caused the problem before pricing the replacement.

Can You Replace Lead Without Re-Roofing?

Usually, yes. Flashings, valleys and bay roofs can normally be replaced on their own, lifting only the tiles or slates next to them and refixing them afterwards. Where the surrounding covering is in poor condition we will tell you, and you decide whether to deal with it now or leave it for another time.

Is Lead Still the Best Material for Flashings?

Lead remains the traditional choice because it is heavy, holds its shape once dressed, and can be formed around brick, stone and tile without joints. Other materials exist, but lead is still what most roofers reach for on period properties and complicated junctions. We will explain the options on your roof and let you choose.
Contact

Can't Find the Answer You're Looking For?

Get in touch with us today.

01844 254178Get a FREE Quote